How to clean your motorcycle helmet in 3 steps

Learn how to take care of the one that can save your life at any point.


Improved visibility

A nice & fresh interior

A helmet looking like new

Easy cleaning without headache

Necessary equipment

Here's what you need :

List of IPONE's products :

  • Helmet'out
    Cleaning spray for the exterior of the helmet that eliminates all dirt and insects encrusted on your helmet and visor
  • Helmet'in
    Cleaning spray for the interior of the helmet that diffuses an active foam that neutralizes the odors of perspiration and refreshes the inside of your helmet
  • Visor Rain Off
    Effective rain repellent for visor and bubble
  • Microfibre wipe
    To capture all dirt without causing micro scratches

Exterior cleaning

With Helmet’Out

Start with spots where the dirt is the most persistent. Spray Helmet'Out on the surface to be cleaned. It is very practical and does not run. With a microfibre wipe, gently rub your helmet until the dust and mosquitoes disappear. Feel free to go scrubbing in every nook and cranny.

Whether the paint on your helmet is shiny or matte, Helmet'Out is suitable for both types of surfaces. It does not leave fingerprints that often complicated to clean off on matte motorcycle helmets. Extra perk, the spray leaves a durable protective film.

Lens cleaning

Still with Helmet’Out

Cleaning your motorcycle’s helmet lens is essential for a good visibility on the road (even more so if you do not have a protective bubble). Otherwise, mosquitoes, pollution and dust will accumulate and become difficult to clean off. Needless to say that in comparison, driving at night, in the fog, with your eyes closed, is a piece of cake.

After cleaning the shell of your motorcycle helmet, use the same product on the screen. Spray and wipe gently with your microfibre wipe.

And for the rain ? Visor Rain’Off !

Between us, rain that sticks to the visor and leaves traces isn’t cool nor great for your security. To end this, you’ll need a rain spray just like our Visor Rain'Off. Its water-repellent effect disperses water instantly. It also reduces fogging and reduces glare due to headlights reflected in water drops. Spray, let it dry for two minutes and it’s done! You can ride safely.

Good to know

Visor Rain’Off leaves a protective film that durably simplifies the maintenance of your lens.

Interior cleaning

Like many, you are used to cleaning your motorcycle helmet on the outside, but what about the inside?

With Helmet’In

Sweat, encrusted traces, your foams also require cleaning.

To clean the inside of your motorcycle helmet, nothing is simpler than the Helmet'In spray. The foam acts as a disinfectant against unpleasant smells. Spray the product evenly and leave it on for 1 hour.

No more sweat smells and dirt, your hair has nothing to fear. You retrieve a clean and fresh helmet, like new. Because you’re worth it!

Our helmet kit includes all the products you need.
Small and flexible, they easily fit in your pockets and even in the glove box.
So what are you waiting for ?

Enjoy your ride !