Wash on cold rims
Wash in the shade
Always wash from top to bottom
No high pressure up close
Duration : 10 min ⏳
What you’ll need to clean your motorcycle
Here's what you’ll need:
Liste des produits IPONE :
How to clean rims?
To clean your rims it's best to go to a car wash or a place with filtered water. We're bikers, but we're also careful about the planet 😉
Rinse & wash the whole
Cleaning the rims
Protect and shine
Good to know
Make sure you stand outside the car wash grate, it would be a shame to drop the bike and damage it while you're trying to make it look good.
Use Wheel Cleaner
Start by wetting your rims with warm water, no more than 30ºC / 86ºF.
Then, in the shade, spray Wheel Cleaner. This will dissolve grease, oil and mud residues without damaging the paint and varnish. It will be your best ally to clean effortlessly your painted, chromed or varnished aluminum rims.
2. Let it work for 1 to 2 minutes maximum
3. If necessary, scrub with a sponge or brush
For the dirtiest rims you can scrub with a clean sponge or a soft bristle brush. And if one cleaning is not enough, don't hesitate to do a second one.
4. Rinse thoroughly with clean water
And wipe the rim to dry and shine.
Wheel Cleaner will lay down a protective film on your rims that delays the build-up of new dirt.
For a perfect result and without marks, we advise you to go little by little. Spray Wheel Cleaner on half a wheel, let it work and rinse. And then move on to the other half!
And before leaving, be careful with wet tires!
For further details, watch our video tutorial on the same subject.
Now you know everything and you have all the cards in your hand to make your rims look good. Remember to carry out these 4 steps on a regular basis. Take care of it, it will give you back.
Have a good ride!